Search

You Are Here:Home > Product > Die Cast > Metal Die Cast
Products Categories
Contact Us
Dongguan Jiayuan Hardware Products Co.,Ltd
Add:Dongguan, Guangdong, China, Changan Town, Xin'an Town, Community Village, B, No.4 Gate, Lam Tin Industrial Park, Lam Tin Road
Tel:+86-769-85316356
Fax:+86-769-85319799
E-mail:business@ginlai.com
Alloy Die Casting

Alloy Die Casting

Alloy die casting has always been seen in the life of clothing, clothing and housing.

Send Inquiry Chat Now

image001(002).jpg

Title: Alloy Die Casting

Description: Alloy die casting has always been seen in the life of clothing, clothing and housing.

Item:

Alloy Die Casting

Process   Type:

Aluminum alloy Die Casting Machine and CNC ,Power coating

Material:

ADC12

Tolerance:

±0.2MM

Surface   treatment:

Electroplating ,Power Coating

Facility:

Aluminum alloy Die Casting Machine and CNC

Certificates:

Material certificate, QC reports, Surface treatment inspection reports

Shipping:

15~20days lead time. By DHL/TNT/FedEx express, air freight etc.

Delivery & Service:

Timely delivery each time. Provide reliable service and responsible for each   customer with each product. Our target is to satisfy every customer with the best service.

Die casting magnesium alloy 

(1) characteristics of magnesium and magnesium alloys and their application prospects in economic and social development 

Magnesium is a typical light metal. Magnesium and magnesium alloys have the advantages of small density (only 1.78, 1. 82g/mm3, aluminum 2/, 1/4), which have higher strength and specific stiffness, better dimensional stability, good resistance to corrosion and electromagnetic radiation, low thermal capacity and solidification latent heat, good casting process properties, good cutting properties and renewable properties, as well as suction. Special properties such as hydrogen, vibration absorption, luminescence and artificial lattice. 

The shortcomings of magnesium and magnesium alloys: one is easy to oxidize and combustible. In the process of melting, casting, heat treatment, cutting and other processes, it is easy to burn and explode in the state of powder. But as long as strict compliance with operating regulations, careful operation, and qualified protection facilities and measures, a conditional ring is added to 0.03% broken (Be) and burning explosion in the alloy. The fry can also be avoided; two is easy to corrode. From the electrochemical point of view, magnesium is more prone to electrochemical corrosion than many other metals, and the oxide film formed on its surface is loose, so its corrosion resistance is low. Therefore, the surface oxidation and coating protection for magnesium alloy castings are required, and the magnesium alloy parts are assembled with other material parts. The electrochemical corrosion should be avoided in direct contact with aluminum alloy (except aluminum alloy aluminum alloy), copper alloy, mirror steel and other parts. Plastic, rubber or paint should be used as gaskets to be separated. 

image003.jpgimage005.jpgimage009.jpg

1. the surface effect is good, it can't be numb.

The engineering says that there are 4 more thimble positions in the mold. Is there any gravure inside the product? It is to ensure that the surface is done better. 

2. the rotary nut and the nut will be scratching, and the elastic function will be stuck. Can it improve?

Yes, we will proofread it again and send it to our guest.

3.Can there be only 500 for 6. batches? There will be a slow mass production in the back.

Because of the high cost of the model, first small test production can be understood, I will apply to the leadership of the company, but the following batch production should be set according to our MOQ2000, because this product is a process, small amount of bad operation, our workers are also a piece of wages, often change the process is not good for the workers, I hope you can understand, thanks. Thank you.

4. this product is smooth and large, requiring no pitting and scratching on the surface. Is that possible?

This is a little difficult, because the products of the alloy will have this kind of unavoidable phenomenon. It needs a standard sample to make the goods. With our experience, we suggest that you can spray sand on the surface of your company. The products we've done before are all sandblasting. I can send you a sample to show you the effect. It is very good.

5.ADC12 be welded with aluminum profiles? Is it strong enough to bear?

We have tried that ADC12 can be dumb argon welded with aluminum profiles, but there will be pores at the weld, because of the density of the reason, bearing a large force will also fracture. So you need to do your tension test.

Hot Tags: alloy die casting, suppliers, manufacturers, factory, wholesale, customized, buy, in stock, made in China
Related Products