Search

Home > News > Content
Products Categories
Contact Us
Dongguan Jiayuan Hardware Products Co.,Ltd
Add:Dongguan, Guangdong, China, Changan Town, Xin'an Town, Community Village, B, No.4 Gate, Lam Tin Industrial Park, Lam Tin Road
Tel:+86-769-85316356
Fax:+86-769-85319799
E-mail:business@ginlai.com
Surface Quality Requirements For Non Machined Surface Of Die Castings
Nov 15, 2018

The mold designer has a great influence on the quality of the mould. Excellent moulds must meet customer requirements, but they should also be easy to process, short opening time, and as much as possible cost savings. Most importantly, starting production as soon as possible is the ultimate goal.

In order to achieve this, we not only need to understand the needs of customers, but also have a strong technical level, which is in line with the actual situation of the company's die casting machine.

Aluminum alloy die casting has been used in traditional industries such as architecture, decoration, aluminum boxes, lamps and lanterns. However, with the rapid development of die-casting industry, the application of aluminium alloy materials in die-casting industry is more and more extensive.

Only when the die-casting industry fully understands the development needs of the market, can the aluminum alloy die-casting industry produce related products according to the market demand and be accepted by the market of Zhongshan Die-casting Plant. Only by conforming to the requirements of market development can any industry survive healthily and smoothly and maintain good development space.

There is no convex mark on the datum plane and mating surface, and no putter marks are found on the decorative surface. If the above traces are unavoidable, the depth of the putter traces should be less than 0.2. On the surface of aluminum alloy die castings, the depth of indentation mark of push rod should be less than 1/10 of wall thickness, less than 0.2y. Without affecting the use of die castings, the push rod marking shall be allowed to protruding, and the height of the protrusion shall be less than 0.2.


Related News